DRAYTEK VIGOR AP-903 WAVE 2 5PORT GIGABIT 2 ANTEN 2.4 GHZ & 5 GHZ INDOOR MESH ACCESS POINT

DrayTek VigorAP 903

Business Access Point with Mesh Technology

VigorAP 903 is 11ac Wave 2 dual-band wireless mesh access point with a 5-port LAN switch, which port 1 supports 802.3at PoE-In.

VigorAP 903 provides the flexibility and advanced features for professional users to take full management of the wireless network, including the mesh technology, which aims for providing an easy way to expand the wireless network in minutes.

AC1300
Delivers 867 Mbps at 5GHz and 400 Mbps at 2.4GHz

128 Users
At Maximum, 64 Per Radio

5 LAN Port
5x 10/100/1000M Base-T RJ-45

1 PoE
802.3at compliant

DrayTek VigorAP 903 Specification

• Physical Interfaces/Controls

  • 5 x Gigabit Ethernet LAN Ports
  • USB 2.0 Port
  • WLAN On/Off & WPS Button
  • Factory Reset Button
  • 2 x Dual-Band Omni-directional RP-SMA Antennae

• Wireless Performance

  • AC1300 Class Wireless Access Point
  • 5GHz: PHY Rate 866Mb/s
  • 2.4GHz: PHY Rate 400Mb/s

• Wireless LAN Compatibility

  • IEEE 802.11ac (Wave 1 & 2) / a / b / g / n
  • Frequency Band 2.4 GHz & 5.8Ghz - Simultaneous Operation
  • Up to 64 clients per radio

• 2.4GHz Wireless LAN Features

  • 802.11b, 802.11g, 802.11n
  • 20 / 40 MHz
  • Up to 400Mb/s total Wi-Fi throughput (PHY Rate):
    • 802.11b/g/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
    • 256-QAM: 400Mb/s PHY rate (200Mb/s per Spatial Stream)

• 5Ghz Wireless LAN Features

  • 802.11ac (Wave 1 & 2) / 802.11n / 802.11a
  • 20 / 40 / 80 MHz
  • Extended 5Ghz Band - Channels 36-48, 52-64, 100-140
  • DFS/TPC Support
  • Multi-User MIMO - New!
  • Up to 866Mb/s total Wi-Fi throughput (PHY Rate):
    • 802.11a/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
    • 802.11ac: 866Mb/s PHY rate (433Mb/s per Spatial Stream)

• Security Features

  • Wireless Encryption : WPA2 (802.11i) Encryption
    • also supports WPA/WEP (Not recommended)
  • Built in 802.1x server (PEAP / EAP-TLS)
  • 802.1x RADIUS Proxy (PEAP / EAP-TLS)
  • PMK Caching & Pre-authentication
  • Wireless Client Isolation
  • Control Isolation of 2.4GHz and 5GHz bands
  • Hidden SSIDs (Selectable)
  • WPS - WiFi Protected Setup
  • MAC Address Filtering (ACL) - Up to 256 entries
  • Mobile Device Management
  • EAPOL Key Retry - New! - Disable EAPOL Key Retry to protect unpatched WLAN clients from KRACK

• Wireless Control Features

  • Wireless Client Status List in WUI
  • Client Limit per radio
  • Client Limit per SSID - New!
  • Up to four distinct SSIDs (for VLANs) for each frequency band (2.4/5Ghz)
  • MAC Cloning
  • Built-in DHCP Server & DHCP Relay
  • Trusted DHCP Server IP for WLAN - New! - Only specifed DHCP server IP can assign IP addresses to WLAN clients
  • 802.1q VLAN
  • Station Control - Time limit wireless connectivity per Station (e.g. 1 hour) & set allowed Reconnection time (e.g. 1 day)

• Wireless Performance Optimisation

  • Airtime Fairness
  • Band Steering
  • AP-Assisted Client Mobility
  • WMM (Wireless MultiMedia)
  • Bandwidth Management (Per Station / Per SSID)

• Diagnostic Features

  • System Log
  • Speed Test
  • Traffic Graph - AP Traffic & Per Station
  • Data Flow Monitor - View live traffic usage per WLAN client
  • Wireless LAN Statistics
  • Interference Monitor - Built-in Site Surveyor

• Management

  • Web Interface (HTTP/HTTPS)
  • DHCP Client
  • TR-069 Control (For VigorACS or other TR-069 platform)
  • CLI (Command Line Interface) - Telnet
  • Firmware upgrade by TR-069/HTTP
  • Central AP Management (from compatible DrayTek router/controller)
  • SNMP v2, v2c, v3
  • Management VLAN
  • LED Control (enable/disable/schedule)
  • Configuration File Export (with password) & Import
  • Wireless Auto On/Off - New! - Sound alert / Disable Wireless if VigorAP is unable to ping specified host

• Power Requirements

  • Maximum Power Consumption: 12 Watt
  • DC 12V via external 100-240v AC/DC PSU (supplied)
  • 802.3af PoE via LAN port A1. Requires PoE injector or a PoE switch such as the VigorSwitch P2121

• Environmental & Physical

  • Operating Temperature : 0 ° C to 45 ° C
  • Operating Humidity: 10% to 90% (Non-condensing)
  • Physical Dimensions: 107mm (W) x 167mm (H) x 45mm (D)
  • Physical Dimensions with Aerials: 107mm (W) x 305mm (H) x 45mm (D)
  • Weight : 370g
  • Fitting: Wall Mountable or Free Standing
  • Pack Contents: VigorAP 903 access point, two RP-SMA Omnidirectional aerials, Quick Start Guide, DC 12V PSU