RUIJIE RG-CS83-48GT4XS-PD 48 PORT 10/100/1000 48 PORT POE 4-PORT 1G/10G SFP+ LAYER 3 YÖNETİLEBİLİR +CLOUD MANAGEDRACK MOUNT SWIT

Highlight Features

48 x 10/100/1000BASE-T ports and 4 x 1GE/10GE SFP+ uplink ports
IEEE 802.3af and IEEE 802.3at compliant, PoE+ supported
VSU, Realizing Flexible Networking and High Performance
Multiple management modes, allowing simplified and easy network maintenance

Hardware Specifications

Port Specifications	RG-CS83-24GT4XS-PD	RG-CS83-48GT4XS-PD
Fixed service port	24 x 10/100/1000BASE-T ports, supporting PoE/PoE+ 4 x 1GE/10GE SFP+ ports	48 x 10/100/1000BASE-T ports, supporting PoE/PoE+ 4 x 1GE/10GE SFP+ ports
Module slot	2 x power module slots
Power module	RG-PA600I-P-F RG-PA1000I-P-F
Fixed management ports	1 x RJ45 console port 1 x RJ45 MGMT port
USB	1 x USB port

System Specifications	RG-CS83-24GT4XS-PD	RG-CS83-48GT4XS-PD
Packet forwarding rate	96 Mpps	132 Mpps
Switching capacity	128 Gbps	176 Gbps
CPU	Dual-core CPU, each core with the clock speed of 1.2 GHz
BootROM	16 MB
Flash memory	2 GB
Memory	1 GB
Switch buffer	3 MB
MAC address table size	32,000
ARP table size	4,000
Number of IPv4 unicast routes	8,000
Number of IPv4 multicast routes	2,500
Number of IPv6 unicast routes	4,000
Number of IPv6 multicast routes	1,200
Number of ACEs	Ingress: 3,500 Egress:1,500
Number of VSU members	4
VLAN translation	4,094

Dimensions and Weight	RG-CS83-24GT4XS-PD	RG-CS83-48GT4XS-PD
Unit dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm (17.40 in.x 16.54 in.x 1.72 in.)
Shipping dimensions (W x D x H)	570 mm x 565 mm x 172 mm (22.44 in. x 22.24 in. x 6.77 in.)
Rack height	1 RU
Unit weight	4.3 kg (9.48 lbs)	4.6 kg (10.14 lbs)
Shipping weight	6.78 kg (14.95 lbs)	6.98 kg (15.39 lbs)

Power Supply and Consumption	RG-CS83-24GT4XS-PD	RG-CS83-48GT4XS-PD
Power supply	2 x pluggable power modules
Power module redundancy	For dual power supplies, 1+1 power redundancy is supported only when the total PoE load of the device is less than the PoE output power of a single power supply
Power input	RG-PA600I-P-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A RG-PA1000I-P-F (AC input 1): ● Rated input voltage: 100 V AC to 130 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz ● Maximum input current: 12 A RG-PA1000I-P-F (AC input 2): ● Rated input voltage: 200 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A
Maximum output power	RG-PA600I-P-F: 600 W RG-PA1000I-P-F: ● 100 V AC to 130 V AC: 930 W ● 200 V AC to 240 V AC: 1000 W
Maximum power consumption	65 W (non-PoE) 810 W (full PoE load)	75 W (non-PoE) 1570 W (full PoE load)
PoE port	All RJ45 ports support PoE/PoE+ (IEEE802.3af/at) power supply
PoE power cable pairs	Mode A (1-2, 3-6 pairs)
PoE output power	Each PoE port provides up to 30 W of power The maximum power depends on the configured power supply. ● 1 x RG-PA600I-P-F: 370 W ● 2 x RG-PA600I-P-F: 740 W; 1 x RG-PA1000I-P-F: 740 W; 2 x RG-PA1000I-P-F: 1480 W; a maximum output of 720 W over 24 ports (30 W x 24)	Each PoE port provides up to 30 W of power The maximum power depends on the configured power supply. ● 1 x RG-PA600I-P-F: 370 W ● 2 x RG-PA600I-P-F: 740 W ● 1 x RG-PA1000I-P-F: 740 W ● 2 x RG-PA1000I-P-F: 1480 W, a maximum output of 1440 W over 48 ports (30 W x 48)
Energy saving	Supported

Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device.

Environment and Reliability	RG-CS83-24GT4XS-PD	RG-CS83-48GT4XS-PD
Temperature	Operating temperature: 0°C to 45°C (32°F to 113°F) Storage temperature: –40°C to +70°C (–40°F to +158°F)
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing)
Altitude	Operating altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.)
Mean time between failure (MTBF)	356,000 hours (about 41 years, dual power modules) 208,000 hours (about 24 years, single power module)	315,000 hours (about 36 years, dual power modules) 193,000 hours (about 22 years, single power module)
Fan	1 x fixed fan module
Heat dissipation	Left-to-right and front-to-right airflow
Acoustic noise	27°C (80.6°F): 51.6 dB 45°C (113°F): 57.4 dB	27°C (80.6°F): 51.6 dB 45°C (113°F): 58.3 dB
Power module hot swapping	Supported
USB hot swapping	Supported
Cable hot swapping	Supported
Power supply monitoring	Monitoring of power supply model and status Power supply fault alarming
Fan monitoring	Fan speed adjustment: 3 levels Automatic speed adjustment Fan failure alarming
Temperature monitoring	Temperature monitoring, over-temperature alarming If the ambient temperature exceeds a certain value, the device will perform reset protection
ESD	ESD contact/air discharge: 6 kV/8 kV ESD susceptibility contact/air discharge: 8 kV/15 kV
Surge protection	MGMT port: 4 kV Service port: 10 kV Power port: common mode 6 kV, differential mode 6 kV
Conformal coating	Conformal coating supported (key components only)

Certifications and Regulatory Compliance	RG-CS83-24GT4XS-PD	RG-CS83-48GT4XS-PD
Safety regulation	IEC 62368-1
EMC regulation	EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
Communication standard	IEEE 802.3-2005 Ethernet standard IEEE 803.ab, IEEE 802.3af, IEEE 802.1d, IEEE 802.1q, IEEE 802.3-2005 (802.3ae), and IEEE 802.3ba (2010) standards, supporting 802.1X authentication

Software Specifications

RG-CS83-PD Series
Feature	Description
Ethernet switching	Jumbo frame (maximum length: 9216 bytes)
	IEEE 802.1Q (4K VLANs)
	Voice VLAN
	Super VLAN and private VLAN
	MAC VLAN, port-based VLAN, protocol-based VLAN, and IP-subnet based VLAN
	GVRP
	Basic QinQ Selective QinQ
	STP, RSTP, and MSTP
	ERPS (G.8032)
	LLDP/LLDP-MED
	LACP (IEEE 802.3ad)
IP service	ARP
	DHCP client, DHCP relay, and DHCP server
	DHCP snooping
	DNS
	DHCPv6 client and DHCPv6 relay
	DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
IP routing	Static routing
	RIP, RIPng
	OSPFv2, OSPFv3, IS-ISv4, ISv4, and IS-ISv6
	BGP4 and BGP4+
	IPv4 and IPv6 VRF
	IPv4 and IPv6 PBR
Multicast	IGMP v1/v2/v3, and IGMP proxy
	IGMP v1/v2/v3 snooping
	PIM-DM, PIM-SM, and PIM-SSM
	MSDP
	MLD v1/v2
	MLD snooping v1/v2
	PIM-SMv6, PIM-SSM v6
ACL and QoS	Standard IP ACLs Extended IP ACLs Extended MAC ACLs ACL80 IPv6 ACL
	ACL redirection
	Port traffic identification
	Port traffic rate limiting
	802.1p/DSCP/ToS traffic classification Eight priority queues per interface
	Traffic policing: CAR
	Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	Rate limiting in each queue
Security	Multiple AAA modes
	RADIUS and TACAS+
	Port-based and MAC-based 802.1x authentication
	Web authentication
	Allowlist
	HTTPS
	SSHv1, SSHv2
	Global IP-MAC binding
	ICMP
	Port isolation and port security
	IP Source Guard
	SAVI
	Gateway ARP anti-spoofing
	CPP(CPU Protection Policy）
	NFPP( Network Foundation Protection Policy）
	Strict and loose RPF uRPF ignoring default routes
Reliability	REUP, RLDP, DLDP
	IPv4 VRRP v2/v3 and IPv6 VRRP
	BFD
	Link tracing, fault notification, and remote loopback based on 802.3ah (EFM)
	Hot swapping of power modules and cables
	3-level fan speed adjustment Fan fault alarm
Device virtualization	Virtual Switching Unit (VSU)
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFlow
	NTP and SNTP
	FTP and TFTP
	SNMP v1/v2/v3
	RMON (1, 2, 3, 9)
	NETCONF
	CWMP (TR-069) standard protocol
	gRPC
	Cloud and SON
PoE	IEEE 802.3af and 802.3at Uninterruptible power supply upon hot start Port priority